Delta™ VRC

Delta VRC Material Lift
Modular • Safe • Easy to Install

Wildeck’s Delta™ Vertical Reciprocating Conveyor (VRC) is a safe and reliable way to transfer your material from level to level. The Delta VRC offers the lower cost of a hydraulic unit while incorporating the many benefits of a mechanical lift. The Delta ships in large sections and installs in less than a day; which minimizes costs and disruption to your operation. Wildeck’s unique and innovative Delta design provides a VRC that is not only durable and reliable, but extremely easy to maintain. When you look at a Delta VRC, you’ll notice Wildeck’s quality and many high value features that are designed in from the start.

• Lift Capacity: 2,200 lbs.
• Lifting Speed: 15 fpm (standard) – other speeds available
• Platform Size: 5 ft. wide x 6 ft. long x 7 ft. high
• Loading / Unloading: “Z” loading – standard “C” loading available
• Gates: Single Swing Gate (standard) – other gates available
• Safe, integrated, full-height perimeter guarding
• Fully-enclosed carriage with galvanized tread plate floor and walls
• Expanded metal roof
• Modular construction for fast and easy ‘bolt-together’ installation
• Fabricated by certified welders
• Optional galvanized ‘winged’ loading ramp or pit mounted
• Electric chain drive lift system for long service life
• Dual roller chains for redundant safety
• UL-508A labeled control panel
• Fully pre-wired for ‘plug-and-play’ electrical connection
• Momentary contact ‘Up’ and ‘Down’ push-button controls
• Broken/slack chain protection provided by a dual-cam safety system

Back to Top

Modular Box Lift

Modular Box Lift
Reliable • Efficient • Safe

• Lift Capacity: up to 500 lbs.
• Lifting Speed: 40 fpm
• Carriage Platform Size: 3 ft. wide x 3 ft. long x 3 ft. high (standard)
• Light: Carriage light available
• Loading / Unloading: “C,” “Z,” or 90 degree loading patterns
• Lift heights designed to meet application requirements. Multi-level configurations available.
• Safe, redundant, and long life dual lifting chains used instead of cables
• Fast-acting braking system provides superior positioning accuracy
• Instantaneous overload protection
• Continuous-duty motor, alloy steel drive shaft, and high service factor gear box provide extended service life
• Durable, heavy gauge steel construction fabricated by AWS D1.1 Certified Welders
• High performance wheels guide the carriage along the high strength steel structure
• Meets all safety guidelines for vertical conveyors
• UL-508A labeled control panel
• Factory assembled and tested
• Stackable, self-contained, modular design for easy shipping and fast, trouble-free installation
• All interlocked gates, call / send stations, and safety enclosures are preassembled and prewired at the factory to reduce installation time
• Custom sizes and special options are available

Back to Top

Automated Tote Lift

Automated Tote Lift
Modular • Flexible • Safe

• Lift Capacity: 50 to 75 lbs.
• Lifting Speeds: 40 to 110 fpm (with ‘soft-start’ and ‘soft-stop’ motor control)
• Load Sizes: Up to 2 ft.- 6 inches wide x 3 ft. long x 3 ft. high
• Carriage Platform: An open framing system supports the carriage conveyor section
• Loading / Unloading: “C” or “Z” loading patterns
• Carriage is guided between (4) four structural tube steel members that act as the frame for the perimeter safety enclosure
• Footprint: Approx. 3 ft. wide by 4 ft. long (not including control panels or in-feed and discharge conveyor sections)
• Full height perimeter guarding is integral to the VRC system
• Interlocked access door for cleaning and maintenance
• Unit accesses a lower level and one or more stops above ground
• Equipped with 3-phase TEFC brake-motors with a fast acting, spring-set electrical brake
• Helical gear reducer transfers motion through a common drive shaft, sprockets, and dual-roller lifting chains
• Unit is partially pre-wired to reduce installation time and cost.
• The main UL listed control panel is integrated into the machine. The standard control panel is rated NEMA 1 and is labeled UL-508A
• System includes one section of in-feed conveyor, one section of carriage mounted conveyor, and one section of discharge conveyor
• Conveyors are powered roller type. Horizontal speeds: 30 to 110 fpm.

Back to Top